How to Replace a Kia Sportage replacement car keys kia Key
For many Kia models keys, the key has a keyless entry system built-in. The key functions like a remote control and is exchangeable by an Kia dealer.
Key fobs might stop working due to a number of reasons, including a dead battery, worn-out buttons signal interference or water damage. Here are some helpful tips to help you get your Kia sportage replacement key working for good.
How do you replace the remote key or smart key?
It doesn’t matter if your 2017 kia sportage key Fob programming is equipped with an intelligent key, remote key, push to start key, or regular metal non-transponder key, the battery in these keys will eventually need replacing. This is especially in the event that your vehicle displays a message that indicates that the remote or smart key has a low battery.
It’s a fairly simple procedure. To replace the battery of the key fob take out the mechanical key from the slit at the back of the key fob. Then break the cover. A small screw is located inside the key fob to hold the battery in its place. With a small screwdriver, remove the screw and remove the battery that was in place. Then, insert the new and close the slit on the key fob.
When the key fob is equipped with an updated battery check it by pressing the locks and unlock buttons. It’s good when the doors lock or unlock as expected. You can now use the hands-free feature to lock and unlock your Kia whenever your fingers start to get cold or you need to run errands around Brandon.
Not all keys may require to be programmed (transponder chips or smart keys). This requires a programming machine which is available to the locksmith who works for the automotive dealer. Other keys (non transponder keys made of steel), do not need programming. If you’re looking to reprogramme your key, you’ll need to note the key code’s number on the key code tag.
How do I replace a battery
If your Kia key fob is not responding to pressing the lock or unlock button on the fob, this is a good indicator that the battery should be replaced. A weak battery could cause other issues, such as the check engine light coming on or the engine not running properly. Fortunately replacing the battery on the key fob is a relatively simple DIY project that requires only a few tools.
Make sure that you shut off your vehicle and shut all doors before you begin. Find the small metal or a plastic piece near the bottom of the key fob. Jiggle it until the key falls out. Then, you can insert the key into the handle of the door for the driver to open your car.
To replace kia key the battery inside the key fob, remove the cover on the rear. Make use of a plastic pry tool to loosen the latch that holds the black negative cable. Take the old battery out, and then position the new battery in a way that its “+” side faces you and the “-” negative side is facing the fob’s electrical contacts. Avoid using too much force when pushing the new CR2032 into place to avoid damaging or bending the metal contacts.
After you have installed the new battery after which you turn the key fob off and on in the ignition until the door locks cycle. Then you can test your Kia key fob to determine whether it’s functioning properly again.
How do you replace a smart key
Depending on the model of your Kia Sportage, you may have an ordinary key fob or a smart key. The difference between the two is that the smart key is equipped with an incredibly small key blade that is hidden inside, while the standard fob does not. Both key fobs come with a battery that will eventually require replacing. It’s an easy process that will take about two minutes.
Be sure to switch off your Kia and be on a level well-lit and well-lit area before you begin. Also, remember that there are tiny components inside the fob that could be snagged if not careful.
The first step is to locate the small release button that is located on the lower backside of your fob. It could be a circular silver button or a rectangular slot. After pressing this button mechanical key blade, it will pop out and you can then open the key fob.
Once the key fob is open, remove the old battery. The new battery is a CR-2032 that can be purchased online or at your local auto parts store. When you are done, you should be able to lock, unlock and start your vehicle using your key fob – even if your engine isn’t running!
How do I replace a mechanical key
The Kia keyfob can be a fantastic convenience which allows us to lock or unlock our car key kia with just pressing one button. Like any other device, the Kia key fob can occasionally have problems. There are solutions to solve these issues and keep your key fobs functioning for a long time.
One of the most frequently encountered problems is a weak or dead battery. This can cause the device to stop working altogether or to work intermittently. If this is the issue then replace the battery with an entirely new battery.
If this isn’t enough to solve the problem, use a flathead screwdriver standard to wedge the plastic casing of the fob open. Be sure not to damage any internal components, or scratch the plastic. After the battery has been removed, replace it with a brand new one.
After the new battery has been put in, close and then open the doors with the mechanical key (every key fob in the kia has an emergency mechanical key that can fit into the slot). Test the key fob and make sure it is working correctly. If the fob still isn’t working, contact a dealer or locksmith to help solve the problem. Make sure they cut you an emergency key that works across all trunk and door cylinders, to prevent lockouts in the future.